Important Things to Note About Rigging Safety

An important aspect of crane operations and load lifting is rigging, because even if the crane and all the equipment related to it are safe, rigging is a huge part of crane safety. Each person who performs rigging work is professional, fully knowledgeable and experienced in all aspects of rigging safety. However, you should review the basics so you will be more aware of rigging safety aspects. An important thing to keep in mind is that rigging is a hoisting triangle. You can have a better understanding of rigging by reading the information below.

Accidents That Could Happen

Falling from a height could happen because rigging can be used while on a high area, probably on open or incomplete structures. Falling from a height can even happen to those who have fall protection devices. This is because of incorrectly using or maintaining the fall protection equipment. Poorly connected fall protection gear may lead to a fall, and so will damaged or faulty anchor points.

Structures may collapse or topple. This happens when structural components are overloaded. The bracing or ground support of these structures cannot withstand overloading, and faults and damage may occur that lead to toppling or collapse.

Suspension syncope or trauma happens during life-threatening conditions, especially when there are rescue arrangements that fail to respond quickly enough. This could leave a person motionless while suspended in their harness.

Understand the Kind of Rope to Use

Wire rope is normally used because of its construction and strength. Some of them have a specific number of strands and wires, which is why a trained operator will know the right kind of rope to use. The load to be hoisted will determine whether a thinner or thicker rope should be used.

Rigging Hardware Items

Aside from choosing the rope, the operator might have to choose the correct hardware items to be used for rigging; these include shackles, eye bolts, hoist rings, pipe handling, lifting points, coil lifters and c-hooks. Other rigging hardware items include things like clamps, beams, chains and web slings. The latter should be inspected at least quarterly or once a year, depending on the use. When it comes to home building, having the proper equipment is important in completing the job properly.

Consider the above things about rigging to avoid jeopardising the safety of the workers. Make sure that all equipment is properly maintained, especially if it will be used for working at height. When the equipment is rented, make sure that the company follows the right protocol when it comes to safety. You should also have insurance for your workers.

Share